Hi,
I installed, but it just does not start. Got debian, am an absolute noob. THX!
Code: Select all
o@osca:~$ bash ./faceswap_setup_x64.sh
bash: ./faceswap_setup_x64.sh: No such file or directory
o@osca:~$ cd Downloads
o@osca:~/Downloads$ bash ./faceswap_setup_x64.sh
001
11 10 010
@@@@ 10
@@@@@@@@ 00 1
@@@@@@@@@@ 1 1 0
@@@@@@@@ 0000 01111
@@@@@@@@@@ 01 110 01 1
@@@@@@@@@@@@ 111 010 0
@@@@@@@@@@@@@@@@ 10 0
@@@@@@@@@@@@@ 0010 1
@@@@@@@@@ @@@ 100 1
@@@@@@@ .@@@@ 10 1
#@@@@@@@@@@@ 001 0
@@@@@@@@@@@ ,
@@@@@@@@ @@@@@
@@@@@@@@ @@@@@@@@
@@@@@@@@@,@@@@@@@@ / _|
%@@@@@@@@@@@@@@@@@ | |_ ___
@@@@@@@@@@@@@@ | _|/ __|
@@@@@@@@@@@@ | | \__ \
@@@@@@@@@@( |_| |___/
@@@@@@
@@@@
================ Welcome to the Linux Faceswap Installer ================
INFO To get setup we need to gather some information about where you
INFO would like Faceswap and Conda to be installed.
INFO To accept the default values just hit the 'ENTER' key for each
INFO option. You will have an opportunity to review your responses prior
INFO to commencing the install.
INFO IMPORTANT: Make sure that the user 'o' has full
INFO permissions for all of the destinations that you select.
Press 'ENTER' to continue with the setup...
================================= CONDA =================================
INFO Faceswap uses Conda as it handles the installation of all
INFO prerequisites.
INFO If you have an existing Conda install then enter the location here,
INFO otherwise Miniconda3 will be installed in the given location.
Please specify a location for Conda. [default: '/home/o/miniconda3']:
INFO The Conda executable can be added to your PATH. This makes it easier
INFO to run Conda commands directly. If you already have a pre-existing
INFO Conda install then you should probably not enable this, otherwise
INFO this should be fine.
Add Conda executable to path? [YES/no]: YES
INFO Faceswap will be installed inside a Conda Environment. If an
INFO environment already exists with the name specified then it will
INFO be deleted.
Please specify a name for the Faceswap Conda Environmnet [default: 'faceswap']:
================================ FACESWAP ================================
INFO Faceswap will be installed in the given location. If a folder exists
INFO at the location you specify, then it will be deleted.
Please specify a location for Faceswap [default: '/home/o/faceswap']:
INFO Faceswap can be run on NVIDIA or AMD GPUs or on CPU. You should make
INFO sure that you have the latest graphics card drivers installed from
INFO the relevant vendor. Please select the version of Faceswap you wish
INFO to install.
Select: 1: NVIDIA
2: AMD (ROCm)
3: CPU
[default: 1]: 1
======================= POST INSTALLATION ACTIONS =======================
INFO Launching Faceswap requires activating your Conda Environment and
INFO then running Faceswap. The installer can simplify this by creating
INFO a desktop shortcut to launch straight into the Faceswap GUI
Create Desktop Shortcut? [YES/no]: YES
========================= Review install options =========================
INFO Please review the selected installation options before proceeding:
- MiniConda3 will be installed in '/home/o/miniconda3'
- MiniConda3 will be added to your PATH
- Conda Environment 'faceswap' will be created.
- Faceswap will be installed in '/home/o/faceswap'
- Installing for 'nvidia'
- A Desktop shortcut will be created
Do you wish to continue? [yes/NO]: yes
INFO Downloading Miniconda3...
######################################################################### 100.0%
INFO Installing Miniconda3...
PREFIX=/home/o/miniconda3
Unpacking payload ...
Installing base environment...
Downloading and Extracting Packages:
Downloading and Extracting Packages:
Preparing transaction: done
Executing transaction: done
installation finished.
INFO Adding Miniconda3 to PATH...
no change /home/o/miniconda3/condabin/conda
no change /home/o/miniconda3/bin/conda
no change /home/o/miniconda3/bin/conda-env
no change /home/o/miniconda3/bin/activate
no change /home/o/miniconda3/bin/deactivate
no change /home/o/miniconda3/etc/profile.d/conda.sh
no change /home/o/miniconda3/etc/fish/conf.d/conda.fish
no change /home/o/miniconda3/shell/condabin/Conda.psm1
no change /home/o/miniconda3/shell/condabin/conda-hook.ps1
no change /home/o/miniconda3/lib/python3.12/site-packages/xontrib/conda.xsh
no change /home/o/miniconda3/etc/profile.d/conda.csh
modified /home/o/.bashrc
==> For changes to take effect, close and re-open your current shell. <==
INFO Creating Conda Virtual Environment...
Channels:
- defaults
Platform: linux-64
Collecting package metadata (repodata.json): ...working... done
Solving environment: ...working... done
## Package Plan ##
environment location: /home/o/miniconda3/envs/faceswap
added / updated specs:
- python=3.10
The following packages will be downloaded:
package | build
---------------------------|-----------------
bzip2-1.0.8 | h5eee18b_5 262 KB
pip-23.3.1 | py310h06a4308_0 2.7 MB
python-3.10.13 | h955ad1f_0 26.8 MB
setuptools-68.2.2 | py310h06a4308_0 957 KB
tzdata-2024a | h04d1e81_0 116 KB
wheel-0.41.2 | py310h06a4308_0 109 KB
xz-5.4.6 | h5eee18b_0 651 KB
------------------------------------------------------------
Total: 31.5 MB
The following NEW packages will be INSTALLED:
_libgcc_mutex pkgs/main/linux-64::_libgcc_mutex-0.1-main
_openmp_mutex pkgs/main/linux-64::_openmp_mutex-5.1-1_gnu
bzip2 pkgs/main/linux-64::bzip2-1.0.8-h5eee18b_5
ca-certificates pkgs/main/linux-64::ca-certificates-2023.12.12-h06a4308_0
ld_impl_linux-64 pkgs/main/linux-64::ld_impl_linux-64-2.38-h1181459_1
libffi pkgs/main/linux-64::libffi-3.4.4-h6a678d5_0
libgcc-ng pkgs/main/linux-64::libgcc-ng-11.2.0-h1234567_1
libgomp pkgs/main/linux-64::libgomp-11.2.0-h1234567_1
libstdcxx-ng pkgs/main/linux-64::libstdcxx-ng-11.2.0-h1234567_1
libuuid pkgs/main/linux-64::libuuid-1.41.5-h5eee18b_0
ncurses pkgs/main/linux-64::ncurses-6.4-h6a678d5_0
openssl pkgs/main/linux-64::openssl-3.0.13-h7f8727e_0
pip pkgs/main/linux-64::pip-23.3.1-py310h06a4308_0
python pkgs/main/linux-64::python-3.10.13-h955ad1f_0
readline pkgs/main/linux-64::readline-8.2-h5eee18b_0
setuptools pkgs/main/linux-64::setuptools-68.2.2-py310h06a4308_0
sqlite pkgs/main/linux-64::sqlite-3.41.2-h5eee18b_0
tk pkgs/main/linux-64::tk-8.6.12-h1ccaba5_0
tzdata pkgs/main/noarch::tzdata-2024a-h04d1e81_0
wheel pkgs/main/linux-64::wheel-0.41.2-py310h06a4308_0
xz pkgs/main/linux-64::xz-5.4.6-h5eee18b_0
zlib pkgs/main/linux-64::zlib-1.2.13-h5eee18b_0
Preparing transaction: ...working... done
Verifying transaction: ...working... done
Executing transaction: ...working... done
INFO Installing Git...
Channels:
- defaults
Platform: linux-64
Collecting package metadata (repodata.json): ...working... done
Solving environment: ...working... done
## Package Plan ##
environment location: /home/o/miniconda3/envs/faceswap
added / updated specs:
- git
The following packages will be downloaded:
package | build
---------------------------|-----------------
curl-8.5.0 | hdbd6064_0 86 KB
gdbm-1.18 | hd4cb3f1_4 194 KB
gettext-0.21.0 | h39681ba_1 3.0 MB
git-2.40.1 | pl5340h36fbf9e_1 9.9 MB
perl-5.34.0 | h5eee18b_2 12.4 MB
------------------------------------------------------------
Total: 25.6 MB
The following NEW packages will be INSTALLED:
c-ares pkgs/main/linux-64::c-ares-1.19.1-h5eee18b_0
curl pkgs/main/linux-64::curl-8.5.0-hdbd6064_0
expat pkgs/main/linux-64::expat-2.5.0-h6a678d5_0
gdbm pkgs/main/linux-64::gdbm-1.18-hd4cb3f1_4
gettext pkgs/main/linux-64::gettext-0.21.0-h39681ba_1
git pkgs/main/linux-64::git-2.40.1-pl5340h36fbf9e_1
icu pkgs/main/linux-64::icu-73.1-h6a678d5_0
krb5 pkgs/main/linux-64::krb5-1.20.1-h143b758_1
libcurl pkgs/main/linux-64::libcurl-8.5.0-h251f7ec_0
libedit pkgs/main/linux-64::libedit-3.1.20230828-h5eee18b_0
libev pkgs/main/linux-64::libev-4.33-h7f8727e_1
libnghttp2 pkgs/main/linux-64::libnghttp2-1.57.0-h2d74bed_0
libssh2 pkgs/main/linux-64::libssh2-1.10.0-hdbd6064_2
libxml2 pkgs/main/linux-64::libxml2-2.10.4-hf1b16e4_1
pcre2 pkgs/main/linux-64::pcre2-10.42-hebb0a14_0
perl pkgs/main/linux-64::perl-5.34.0-h5eee18b_2
Preparing transaction: ...working... done
Verifying transaction: ...working... done
Executing transaction: ...working... done
INFO Downloading Faceswap...
Cloning into '/home/o/faceswap'...
remote: Enumerating objects: 1306, done.
remote: Counting objects: 100% (1306/1306), done.
remote: Compressing objects: 100% (1074/1074), done.
remote: Total 1306 (delta 588), reused 591 (delta 210), pack-reused 0
Receiving objects: 100% (1306/1306), 88.74 MiB | 5.16 MiB/s, done.
Resolving deltas: 100% (588/588), done.
INFO Setting up Faceswap...
/home/o/faceswap/setup.py:18: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
from pkg_resources import parse_requirements
INFO Running without root/admin privileges
INFO The tool provides tips for installation and installs required python packages
INFO Setup in Linux 6.1.0-17-amd64
INFO Installed Python: 3.10.13 64bit
INFO Running in Conda
INFO Running in a Virtual Environment
INFO Encoding: UTF-8
INFO Installed pip: 23.3.1
INFO Cuda search path set to '/home/o/miniconda3/envs/faceswap/lib'
INFO Faceswap config written to: /home/o/faceswap/config/.faceswap
INFO Adding conda required package '['cudatoolkit>=11.2,<11.3', 'cudnn>=8.1,<8.2']' for backend 'nvidia')
INFO Installing Required Python Packages. This may take some time...
INFO Installing pexpect>=4.8.0
INFO Installing Required Conda Packages. This may take some time...
INFO Installing tk=*=xft_*
tk-8.6.13 | 3.1 MB | ███████████████████████████████████ | 100%
openssl-3.2.1 | 2.7 MB | ███████████████████████████████████ | 100%
libgcc-ng-13.2.0 | 752 KB | ███████████████████████████████████ | 100%
libgomp-13.2.0 | 410 KB | ███████████████████████████████████ | 100%
ca-certificates-2024 | 152 KB | ███████████████████████████████████ | 100%
zlib-1.2.13 | 91 KB | ███████████████████████████████████ | 100%
libzlib-1.2.13 | 60 KB | ███████████████████████████████████ | 100%
_openmp_mutex-4.5 | 23 KB | ███████████████████████████████████ | 100%
_libgcc_mutex-0.1 | 3 KB | ███████████████████████████████████ | 100%
INFO Installing xorg-libxft
python-3.10.13 | 24.5 MB | ███████████████████████████████████ | 100%
font-ttf-ubuntu-0.83 | 1.5 MB | ███████████████████████████████████ | 100%
libsqlite-3.45.2 | 837 KB | ███████████████████████████████████ | 100%
xorg-libx11-1.8.7 | 809 KB | ███████████████████████████████████ | 100%
font-ttf-source-code | 684 KB | ███████████████████████████████████ | 100%
freetype-2.12.1 | 620 KB | ███████████████████████████████████ | 100%
font-ttf-dejavu-sans | 388 KB | ███████████████████████████████████ | 100%
libxcb-1.15 | 375 KB | ███████████████████████████████████ | 100%
libpng-1.6.43 | 281 KB | ███████████████████████████████████ | 100%
fontconfig-2.14.2 | 266 KB | ███████████████████████████████████ | 100%
libxcrypt-4.4.36 | 98 KB | ███████████████████████████████████ | 100%
font-ttf-inconsolata | 94 KB | ███████████████████████████████████ | 100%
xorg-xproto-7.0.31 | 73 KB | ███████████████████████████████████ | 100%
xorg-libxft-2.3.8 | 58 KB | ███████████████████████████████████ | 100%
xorg-libxrender-0.9. | 37 KB | ███████████████████████████████████ | 100%
libuuid-2.38.1 | 33 KB | ███████████████████████████████████ | 100%
libnsl-2.0.1 | 33 KB | ███████████████████████████████████ | 100%
xorg-xextproto-7.3.0 | 30 KB | ███████████████████████████████████ | 100%
xorg-kbproto-1.0.7 | 27 KB | ███████████████████████████████████ | 100%
xorg-libxdmcp-1.1.3 | 19 KB | ███████████████████████████████████ | 100%
xorg-libxau-1.0.11 | 14 KB | ███████████████████████████████████ | 100%
xorg-renderproto-0.1 | 9 KB | ███████████████████████████████████ | 100%
pthread-stubs-0.4 | 5 KB | ███████████████████████████████████ | 100%
INFO Installing cudatoolkit>=11.2,<11.3 cudnn>=8.1,<8.2
cudnn-8.1.0.77 | 634.8 MB | ███████████████████████████████████ | 100%
cudnn-8.1.0.77 | 634.8 MB | ███████████████████████████████████ | 100%
cudatoolkit-11.2.2 | 630.6 MB | ███████████████████████████████████ | 100%
INFO Installing tqdm>=4.65
tqdm-4.65.0 | 132 KB | ███████████████████████████████████ | 100%
INFO Installing psutil>=5.9.0
psutil-5.9.0 | 368 KB | ███████████████████████████████████ | 100%
INFO Installing numexpr>=2.8.7
numpy-base-1.26.4 | 7.2 MB | ███████████████████████████████████ | 100%
libopenblas-0.3.21 | 5.4 MB | ███████████████████████████████████ | 100%
libgfortran5-11.2.0 | 2.0 MB | ███████████████████████████████████ | 100%
numexpr-2.8.7 | 141 KB | ███████████████████████████████████ | 100%
blas-1.0 | 46 KB | ███████████████████████████████████ | 100%
libgfortran-ng-11.2. | 20 KB | ███████████████████████████████████ | 100%
numpy-1.26.4 | 10 KB | ███████████████████████████████████ | 100%
INFO Installing numpy>=1.26.0
INFO Installing opencv-python>=4.9.0.0
INFO opencv-python>=4.9.0.0 not available in Conda. Installing with pip
INFO Installing opencv-python>=4.9.0.0
opencv_python-4.9.0.8| 62.2 MB | ███████████████████████████████████ | 100%
INFO Installing pillow<10.0.0,>=9.4.0
pillow-9.4.0 | 729 KB | ███████████████████████████████████ | 100%
libtiff-4.5.1 | 533 KB | ███████████████████████████████████ | 100%
libwebp-base-1.3.2 | 387 KB | ███████████████████████████████████ | 100%
lcms2-2.12 | 312 KB | ███████████████████████████████████ | 100%
jpeg-9e | 262 KB | ███████████████████████████████████ | 100%
lerc-3.0 | 196 KB | ███████████████████████████████████ | 100%
libwebp-1.3.2 | 87 KB | ███████████████████████████████████ | 100%
giflib-5.2.1 | 80 KB | ███████████████████████████████████ | 100%
libdeflate-1.17 | 64 KB | ███████████████████████████████████ | 100%
INFO Installing scikit-learn>=1.3.0
scipy-1.11.4 | 20.5 MB | ███████████████████████████████████ | 100%
scikit-learn-1.3.0 | 8.4 MB | ███████████████████████████████████ | 100%
joblib-1.2.0 | 400 KB | ███████████████████████████████████ | 100%
threadpoolctl-2.2.0 | 16 KB | ███████████████████████████████████ | 100%
INFO Installing fastcluster>=1.2.6
fastcluster-1.2.6 | 47 KB | ███████████████████████████████████ | 100%
python_abi-3.10 | 6 KB | ███████████████████████████████████ | 100%
INFO Installing matplotlib>=3.8.0
mysql-5.7.24 | 60.0 MB | ███████████████████████████████████ | 100%
qt-main-5.15.2 | 53.7 MB | ███████████████████████████████████ | 100%
libllvm14-14.0.6 | 33.4 MB | ███████████████████████████████████ | 100%
libclang13-14.0.6 | 9.8 MB | ███████████████████████████████████ | 100%
matplotlib-base-3.8. | 6.8 MB | ███████████████████████████████████ | 100%
pyqt-5.15.10 | 5.7 MB | ███████████████████████████████████ | 100%
libcups-2.4.2 | 4.5 MB | ███████████████████████████████████ | 100%
libpq-12.17 | 2.4 MB | ███████████████████████████████████ | 100%
gst-plugins-base-1.1 | 2.2 MB | ███████████████████████████████████ | 100%
gstreamer-1.14.1 | 1.7 MB | ███████████████████████████████████ | 100%
libglib-2.78.4 | 1.5 MB | ███████████████████████████████████ | 100%
libiconv-1.16 | 736 KB | ███████████████████████████████████ | 100%
tornado-6.3.3 | 644 KB | ███████████████████████████████████ | 100%
fonttools-4.25.0 | 632 KB | ███████████████████████████████████ | 100%
libxkbcommon-1.0.1 | 590 KB | ███████████████████████████████████ | 100%
sip-6.7.12 | 509 KB | ███████████████████████████████████ | 100%
glib-2.78.4 | 508 KB | ███████████████████████████████████ | 100%
dbus-1.13.18 | 504 KB | ███████████████████████████████████ | 100%
libbrotlienc-1.0.9 | 264 KB | ███████████████████████████████████ | 100%
contourpy-1.2.0 | 246 KB | ███████████████████████████████████ | 100%
cyrus-sasl-2.1.28 | 237 KB | ███████████████████████████████████ | 100%
python-dateutil-2.8. | 233 KB | ███████████████████████████████████ | 100%
pyparsing-3.0.9 | 153 KB | ███████████████████████████████████ | 100%
INFO Installing imageio>=2.33.1
imageio-2.33.1 | 472 KB | ███████████████████████████████████ | 100%
INFO Installing imageio-ffmpeg>=0.4.9
imageio_ffmpeg-0.4.9 | 26.9 MB | ███████████████████████████████████ | 100%
INFO Installing ffmpy>=0.3.0
ffmpeg-5.1.2 | 9.2 MB | ███████████████████████████████████ | 100%
p11-kit-0.24.1 | 4.5 MB | ███████████████████████████████████ | 100%
x265-3.5 | 3.2 MB | ███████████████████████████████████ | 100%
aom-3.5.0 | 2.7 MB | ███████████████████████████████████ | 100%
svt-av1-1.4.1 | 2.4 MB | ███████████████████████████████████ | 100%
gnutls-3.7.9 | 1.9 MB | ███████████████████████████████████ | 100%
libunistring-0.9.10 | 1.4 MB | ███████████████████████████████████ | 100%
libvpx-1.11.0 | 1.1 MB | ███████████████████████████████████ | 100%
nettle-3.9.1 | 988 KB | ███████████████████████████████████ | 100%
x264-1!164.3095 | 877 KB | ███████████████████████████████████ | 100%
openh264-2.3.1 | 702 KB | ███████████████████████████████████ | 100%
gmp-6.3.0 | 556 KB | ███████████████████████████████████ | 100%
lame-3.100 | 496 KB | ███████████████████████████████████ | 100%
libdrm-2.4.120 | 296 KB | ███████████████████████████████████ | 100%
libopus-1.3.1 | 255 KB | ███████████████████████████████████ | 100%
libva-2.21.0 | 185 KB | ███████████████████████████████████ | 100%
libidn2-2.3.3 | 155 KB | ███████████████████████████████████ | 100%
libtasn1-4.19.0 | 114 KB | ███████████████████████████████████ | 100%
xorg-libxext-1.3.4 | 49 KB | ███████████████████████████████████ | 100%
libpciaccess-0.18 | 28 KB | ███████████████████████████████████ | 100%
xorg-libxfixes-5.0.3 | 18 KB | ███████████████████████████████████ | 100%
ffmpy-0.3.0 | 10 KB | ███████████████████████████████████ | 100%
xorg-fixesproto-5.0 | 9 KB | ███████████████████████████████████ | 100%
INFO Installing nvidia-ml-py>=12.535,<300
nvidia-ml-py-12.535. | 37 KB | ███████████████████████████████████ | 100%
INFO Installing tensorflow>=2.10.0,<2.11.0
tensorflow-2.10.1 | 133.7 kB | ███████████████████████████████████ | 100%
google_pasta-0.2.0 | 5.1 MB | ███████████████████████████████████ | 100%
wrapt-1.16.0 | 186.9 kB | ███████████████████████████████████ | 100%
Markdown-3.5.2 | 226.7 kB | ███████████████████████████████████ | 100%
certifi-2024.2.2 | 61.6 kB | ███████████████████████████████████ | 100%
pyasn1_modules-0.3.0 | 181.3 kB | ███████████████████████████████████ | 100%
urllib3-2.2.1 | 84.9 kB | ███████████████████████████████████ | 100%
INFO All python3 dependencies are met.
You are good to go.
Enter: 'python faceswap.py -h' to see the options
'python faceswap.py gui' to launch the GUI
INFO Faceswap installation is complete!
INFO You can launch Faceswap from the icon on your desktop
o@osca:~/Downloads$
o@osc
aber nix klappt wenn ich das script starte:
[Desktop Entry]
Version=1.0
Type=Application
Terminal=true
Name=FaceSwap
Exec=bash /home/o/faceswap/faceswap_gui_launcher.sh
Comment=FaceSwap
Icon=/home/o/faceswap/.install/linux/fs_logo.ico